No-weld header adapter kits
Who says you can't smoke on cans?
No-weld header adapter installation kits are the easiest way to add smoke to your header and canister exhaust system. No welding is required. Simply drill a hole and install the contoured nut from the inside of the header roughly 1"-1.5" downstream of the mounting flange. A contoured spacer mounts on the outside of the header pipe and the assembly clamps tightly to the pipe wall when the hex nut is tightened. Works with virtually any header. Acceptable tubing wall thickness range is 0.000" to 0.080"
No-weld adapters are sized to match the contour of most popular header pipes. Just measure your header outer diameter or OD to select your size. Nozzle sold separately.
If you ever wish to remove smoke from your exhaust system, we offer a nozzle delete kit which takes place of the smoke nozzle. The nozzle delete kit works in conjunction with the no-weld kit so your not left with a hole in the side of your header.
No-weld smoke nozzle adapter kit with atomizing nozzle installed.
No-weld header adapter installation kits
No-Weld kit 14mm
No-Weld kits allow bolt on installation of nozzles onto header pipes through a drilled hole. No-Weld kits include all hardware needed to install one smoke nozzle to a 14mm header pipe as on a Kolm BX 120 or similar. Smoke nozzle available separately.
No-Weld kit 20mm
No-Weld kits allow bolt on installation of nozzles onto header pipes through a drilled hole. No-Weld kits include all hardware needed to install one smoke nozzle to a 20mm header pipe. Smoke nozzle available separately.
No-Weld kit 20mm KELEO
No-Weld kits allow bolt on installation of nozzles onto header pipes through a drilled hole. No-Weld kits include all hardware needed to install one smoke nozzle to a 20mm KELEO radial ring muffler as on a Saito FG-90R3 or similar. Smoke nozzle available separately.
No-Weld kit 22mm
No-Weld kits allow bolt on installation of nozzles onto header pipes through a drilled hole. No-Weld kits include all hardware needed to install one smoke nozzle to a 22mm header pipe as on a DA35 or DA70 or similar. Smoke nozzle available separately.
No-Weld kit 24mm-28mm
No-Weld kits allow bolt on installation of nozzles onto header pipes through a drilled hole. No-Weld kits include all hardware needed to install one smoke nozzle to a 24-28mm, or 1" header pipe as on a DA50, DA60, DA100, DA120 or similar. Smoke nozzle available separately.
No-Weld kit 28mm
No-Weld kits allow bolt on installation of nozzles onto header pipes through a drilled hole. No-Weld kits include all hardware needed to install one smoke nozzle to a 28mm header pipe as on a DA150, DA170, DA200 or similar. Smoke nozzle available separately.